Thermo Scientific 5028i, Инструкция по эксплуатации, Страница: 278 / 330

C-Link Protocol Commands
Keys/Display
B-38 Model 5028
i
Instruction Manual Thermo Fisher Scientific
set vf pres cal def
This command resets the vacuum and flow pressure calibration to
their default values.The following example resets the vacuum and flow
pressure calibration to default values.
Send: set vf pres cal def
Receive: set vf pres cal def ok
tape to ncal ratio a/b
This command gets tape / zero ratio.The following example gets tape /
zero ratio 1.000.
Send: tape to ncal ratio a
Receive: tape to ncal ratio a 1.000
Send: tape to ncal ratio b
Receive: tape to ncal ratio b 1.000
set tape to ncal ratio a/b value
This command sets the value of tape / zero ratio.The following example
sets tape / zero ratio to 70.
Send: set tape to ncal ratio a 70
Receive: set tape to ncal ratio a 70 ok
Send: set tape to ncal ratio b 70
Receive: set tape to ncal ratio b 70 ok
push button
do me 1
down menu 2
en ri 3
enter right 4
he ru
help
run
le up
left
button = | do | down | en | enter | he | help | le | left | me | menu | ri |
right | ru | run | up | 1 | 2 | 3 | 4 |
These commands simulate pressing the front panel pushbuttons. The
numbers represent the front panel soft keys, from left to right.
Send: push enter
Receive: push enter ok
isc
iscreen
These commands retrieve the framebuffer data used for the display on
the iSeries instrument. It is 19200 bytes in size, 2-bits per pixel, 4 pixels
per byte arranged as 320 by 240 characters. The data is sent in RLE
Keys/Display