Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 7 / 330

Thermo Fisher Scientific Model 5028
i
Instruction Manual i
About This Manual
This manual provides information about installing, operating,
maintaining, and servicing the Model 5028i Continuous Particulate
Monitor. It also contains important alerts to ensure safe operation and
prevent equipment damage. The manual is organized into the following
chapters and appendices to provide direct access to specific operation
and service information.
l
Chapter 1 “ Introduction ” provides an overview of product features,
describes the principle of operation, and lists the specifications.
l
Chapter 2 “ Installation ” describes how to unpack, setup, and startup
the instrument.
l
Chapter 3 “ Operation ” describes the front panel display screens, the
front panel pushbuttons, and the menu-driven firmware.
l
Chapter 4 “ Calibration ” provides the procedures for calibrating the
analyzer and describes the required equipment.
l
Chapter 5 “ Preventive Maintenance ” provides maintenance
procedures to ensure reliable and consistent instrument operation.
l
Chapter 6 “ Troubleshooting ” presents guidelines for diagnosing
analyzer failures, isolating faults, and includes recommended actions
for restoring proper operation.
l
Chapter 7 “ Servicing ” presents safety alerts for technicians working
on the analyzer, step-by-step instructions for repairing and replacing
components, and a replacement parts list. It also includes contact
information for product support and technical information.
l
Chapter 8 “ System Description ” describes the function and location
of the system components, provides an overview of the firmware
structure, and includes a description of the system electronics and
input/output connections.
l
Chapter 9 “ Optional Equipment ” describes the optional equipment
that can be used with this analyzer.
l
Appendix A “ Warranty ” is a copy of the warranty statement.
l
Appendix B “ C-Link Protocol Commands ” provides a description of
the C-Link protocol commands that can be used to remotely control
an analyzer using a host device such as a PC or datalogger.