Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 10 / 330

About This Manual
Electrical/Safety Certifications
iv Model 5028
i
Instruction Manual Thermo Fisher Scientific
The product has been tested and has been documented to be in
compliance with the following U.S. and Canadian safety standards:
UL61010-1:2012 Ed.3+R:15 Jul 2015
CSA C22.2 No.61010-1:2012 Ed.3+G1
IEC61010-1:2010
EN 61010-1:2010
EN 61010-2-081:2015
UL 61010-2-081:2015 Ed.2
CSA C22.2 No.61010-2-081 Issued: 2004/07/01 (R2014)
IEC 61010-2-081:2015
EN61326-1:2013
CFR 47 Part 15:2015
ANSI C63.4:2014
ICES-003 Issue 6(2016)
Thermo Fisher Scientific certifies that this product operates in
compliance with the EC Directive 2014/30/EU in reference to
electrical emissions and immunity. Specifically, the equipment meets
the requirements of EN 61326-1:2013 for Immunity and Emissions. In
addition, the hardware has been tested for personal or fire safety hazards
in accordance with EN 61010-1:2010 (Safety) in fulfillment of EC
Directive 2014/35/EU.
Model 5028i Continuous Particulate Monitor for PM10 Automated
Equivalent Method
: EQPM-1102-150; for PM2.5
Automated
Equivalent Method : EQPM-0609-183.
“Model 5028i Continuous Particulate Monitor” configured with two
10 micron size selective inlets, one PM2.5 BGI Inc. Very Sharp Cut
Cyclone (VSCC™) particle size separator and DHS, operated with a
total actual flow of 16.67 L/min for each channel. and according to
the Thermo Scientific 5028 i Continuous Ambient Particulate Monitor
operating manual.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Note
This equipment has been tested and found to comply within
the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be
Electrical/Safety
Certifications
FEM Statement
FCC Compliance