Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 138 / 330

Operation
Service Menu
3-84 Model 5028
i
Instruction Manual Thermo Fisher Scientific
CHOOSE LANGUAGE:
CURRENTLY: ENGLISH
SET TO: CHINESE
CHANGE VALUE
SAVE
RANGE AVG DIAGS ALARM
The Display Pixel Test screen is used to test the LCD display, by
toggling between all pixels on and all pixels off to ensure that they are
functioning properly. The display pixel test screen is visible only when
the instrument is in service mode. For more information on the service
mode, see “ Service Mode ” earlier in this chapter.
l
In the Main Menu, choose Service >
Display Pixel Test
.
DISPLAY PIXEL TEST:
DURING TEST PRESS OR
xx
TO EXIT, TO TOGGLE XXXXXx
BEGIN TEST
GO BACK TO MENU
RANGE AVG DIAGS ALARM
The Restore User Defaults screen is used to reset the user calibration
and configuration values to factory defaults. The restore user defaults
screen is visible only when the instrument is in service mode. For more
information on the service mode, see “ Service Mode ” earlier in this
chapter.
l
In the Main Menu, choose Service >
Restore User Defaults
.
RESTORE USER DEFAULTS:
RESTORE
RANGE AVG DIAGS ALARM
RESTORE USER DEFAULTS:
RESTORE
ARE YOU SURE YOU WANT TO? x
PRESS TO CONFIRM RESTORE
RANGE AVG DIAGS ALARM
The Restore User Defaults screen is used to reset the user calibration
and configuration values to factory defaults. The restore user defaults
screen is visible only when the instrument is in service mode. For more
information on the service mode, see “ Service Mode ” earlier in this
chapter.
l
In the Main Menu, choose Service >
Restore User Defaults
.
Display Pixel Test
Restore User Defaults
Restore Factory Defaults