Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 113 / 330

Operation
Alarms Menu
Thermo Fisher Scientific Model 5028
i
Instruction Manual 3-59
Items displayed are determined by the options installed. To see the
actual reading of an item and its minimum and maximum limits, move
the cursor to the item and press
. If the readings go beyond either
the minimum or maximum limit, an alarm is activated and the alarm
(bell) icon appears in the status bar on the Run screen and in the Main
Menu.
If any alarms are active, the alarm (bell) icon is displayed on the right
side of the status bar.
l
In the Main Menu, choose
Alarms
.
ALARMS:
ALARMS DETECTED 0
>INSTRUMENT ALARMS 0
DETECTOR ALARMS 0
RH/TEMPERATURE ALARMS 0
PRESSURE/VACUUM ALARMS 0
RANGE AVG DIAGS ALARM
FLOW ALARMS 0
CONC ALARMS 0
The Instrument Alarms submenu allows the user to view a set of alarms
for different boards. The filter tape change, heater power, and bench
items (motherboard, interface board and I/O expansion board) are read
only. The motherboard status, interface board status, and I/O expansion
board status (if installed) indicate that the power supplies are working
and connections are successful. There are no setting screens for these
alarms.
l
In the Main Menu, choose Alarms > Instrument Alarms .
INSTRUMENT ALARMS:
>FILTER TAPE COUNTER OK
FILTER TAPE CHANGE OK
BENCH OK
HEATER POWER OK
MOTHERBOARD STATUS OK
RANGE AVG DIAGS ALARM
FILTER TAPE COUNTER B
FILTER TAPE CHANGE B
BENCH B
HEATER POWER B
INTERFACE STATUS OK
I/O EXP STATUS OK
The Filter Tape Counter screen displays the current filter tape counter
value and sets the maximum alarm limit. If the filter tape counter
reading goes beyond the maximum limit, an alarm is activated and the
alarm (bell) icon appears in the status bar on the Run screen and in the
Main Menu.
Instrument Alarms
Filter Tape Counter