MONCOLHA8
- 1 -
VELLEMAN
MONCOLHA8 – 8" TFT LCD 16/9 MONITOR WITH REMOTE CONTROL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the
MONCOLHA8
. We advise you to read this manual before you bring the device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
This is a light CRT monitor with low radiation and no distortion. Power consumption is minimal and the construction
materials are nature-friendly. This 8” TFT LCD monitor uses a DSP chip and offers a clear picture and true colours.
2. Features
•
IR remote control
•
OSD display
•
setting mode with automating store function
•
automatic recognition of NTSC/PAL signal guarantees a clear picture
3. Specifications
Screen Size
8” / 20cm (diagonal)
Display Format
1140 (RGB) (H) x 234 (V) = 266760 pixels
Effective Display Dimensions
170 x 101mm
System
NTSC/PAL (automatic recognition)
Video Input
1.0Vp-p (75
Ω
)
Audio Input
-10dB (10k
Ω
)
Power Supply
DC11V-14V (e.g.
PS1205R
)
Current
≤
800mA
Power Consumption
≤
10W
Operating Temperature
5 to 40°C
Storage Temperature
-10 to +80°C
4. Front Panel Description
1.
IR WINDOW: Sensor for remote control IR signals.
2.
POWER switch: Press this button to activate/deactivate the
monitor. The indicator (7) lights up to indicate that the device
is active.
3.
MENU / SEL button: Select a parameter: brightness / contrast
/ saturation / hue (only NTSC playback), 4:3 / 16:9 selection,
source input (AV1 or AV2), AV inverse image (up/down)
4.
“+” button: To increase the volume (standard) or the value for the selected
parameter (#3).
5.
“-“ button: To lower the volume (standard) or the value for the selected parameter (#3).
6.
HEADPHONE input
7.
POWER LED: Is lit when the device is activated.
8.
TFT LCD
9.
CONNECTOR: Input jack.
Speaker is on the back.
