Thermo Scientific 5028i, Инструкция по эксплуатации

Страница: 259 / 330

C-Link Protocol Commands
Diagnostics
Thermo Fisher Scientific Model 5028
i
Instruction Manual B-19
Send: set alarm vac pres max b 250.0
Receive: set alarm vac pres max b 250.0 ok
amb rh
This command reports the ambient RH, in percent. The following
example reports that the ambient RH is 30%.
Send: amb rh
Receive: amb rh 30.0 %
amb temp
This command reports the current ambient temperature, in degrees C.
The following example reports that the ambient temperature is 15 °C.
Send: amb temp
Receive: amb temp 15.0 degC
baro pres
This command reports the current barometric pressure, in mmHg. The
following example reports that the barometric pressure is 722 mmHg.
Send: baro pres
Receive: baro pres 722.0 mmHg
board temp
This command reports the current board temperature, in degrees C. The
following example reports that the board temperature is 15 °C.
Send: board temp
Receive: board temp 15.0 degC
crn a/b
This command reports the current radon concentration for the detector.
The following example reports that the radon concentration is 1.2 Bq/
m
3
.
Send: crn a
Receive: crn a 1.20 Bq/m3
Send: crn b
Receive: crn b 1.20 Bq/m3
det status a/b
This command reports the current mass for the detector. The sequence
is: β c, β , α . Each value is separated by a space.
Send: det status a
Receive: det status a 30000 25000 500
Send: det status b
Receive: det status b 30000 25000 500
Diagnostics