C-Link Protocol Commands
Communications Configuration
B-40
Model 42
i
Trace Level Instruction Manual
Thermo Fisher Scientific
Note
When DHCP is set to on, the user-supplied addr gw, addr dns, addr
ip, and addr nm parameters are not used.
▲
Send:
set
dhcp
on
Receive:
set dhcp on ok
format
This command reports the current reply termination format. The example
below shows that the reply format is 00, which means reply with no
checksum, according to
Table B–8
.
Send:
format
Receive: format
00
set format
format
This command sets the reply termination
format
, where
format
is set
according to
Table B–8
. The example below sets the reply termination
format to checksum.
Send:
set
format
01
Receive:
set format 01 ok
Table B–8.
Reply Termination Formats
Format
Reply Termination
00 <CR>
01
<NL> sum xxxx <CR>
where xxxx = 4 hexadecimal digits that represent the sum of all the
characters (bytes) in the message
host name
This command reports the host name string.
Send:
host
name
Receive: host
name
analyzer01
set host name
string
This command sets the host name
string
, where
string
is 1-13 alphanumeric
characters.
Send:
set host name analyzer01
Receive:
set host name analyzer01 ok
instr name
This command reports the instrument name.
