Suzuki Liana RH413, Руководство по обслуживанию

Страница: 637 / 1302

Automatic Transmission/Transaxle: 5A-89
• When solenoid valve (1) is not connected to battery
(2), confirm that solenoid valve is open condition by
blowing air (50 – 200 kpa, 0.5 – 2.0 kg/cm
2 , 7 – 28.5
psi) into solenoid valve as shown in the figure.
NOTE
Do not fail to inspect with air to prevent
mistaken checking because return spring for
valve is not installed into solenoid valve.
Timing solenoid valve
CAUTION
!
Do not insert air gun against strainer
installed on inlet of solenoid valve too deeply,
when blowing air into solenoid valve. If not,
the strainer will be damaged.
• Check that solenoid valve (1) actuate with click sound
when battery voltage is conducted.
• When timing solenoid valve (1) is connected to battery
(2), confirm that timing solenoid valve is open
condition by blowing air (50 – 200 kpa, 0.5 – 2.0 kg/
cm
2 , 7 – 28.5 psi) into solenoid valve as shown in the
figure.
• When timing solenoid valve (1) is not connected to
battery (2), confirm that timing solenoid valve is close
condition by blowing air (50 – 200 kpa, 0.5 – 2.0 kg/
cm
2 , 7 – 28.5 psi) into solenoid valve as shown in the
figure.
NOTE
Do not fail to inspect with air to prevent
mistaken checking because return spring for
valve is not installed into solenoid valve.
I2RH0B510062-01
I2RH0B510063-01