Suzuki Liana RH413, Руководство по обслуживанию

Страница: 728 / 1302

5B-19 Manual Transmission/Transaxle:
7) Fit 5th gear shift fork (1) to sleeve (3) and hub (2)
assembly, and install them into input shaft and gear
shift shaft, aligning punch mark (4) with matching
mark (5) on input shaft.
8) Tighten shift fork shaft bolt (2) to which thread lock
cement has been applied.
“A”: Thread lock cement 99000–32110
Tightening torque
Shift fork shaft bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-
ft)
9) Using special tool, install new circlip (1) to input shaft
(3) in specified direction as shown in figure.
Special tool
: 09900–06107
10) Clean mating surface of both left case (2) and side
cover (1), apply sealant to side cover as shown in
figure by such amount that its section is 1.5 mm
(0.059 in.) in diameter, mate it with left case, and
then tighten side cover bolts with specified torque.
“B”: Sealant 99000–31260
Tightening torque
Side cover bolt (a): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
Manual Transaxle Assembly Disassembly and
Assembly
S3RH0A5206015
Disassembly
1) Remove left case plate bolts (1), and take off left
case plate (2).
4. Polished surface
I3RH0A520080-01
2, (a), “A”
1
3
3
4
1
I4RH01520051-01
3. Input shaft
I3RH0A520081-01
I4RH01520018-01