Suzuki Liana RH413, Руководство по обслуживанию

Страница: 723 / 1302

Manual Transmission/Transaxle: 5B-14
Gear Shift and Select Shaft Removal and
Installation
S3RH0A5206011
Removal
1) Remove gear shift interlock bolt (1) and 5th to
reverse interlock guide bolt (2) from transaxle case.
2) Remove gear shift & select shaft assembly (3).
Installation
1) Clean mating surface of guide case.
2) Install gear shift and select shaft assembly with new
gasket into transaxle.
3) Place breather hose bracket and install it together
with gear shift guide case bolts (2) to which thread
lock cement has been applied and then tighten it to
specified torque.
“A”: Thread lock cement 99000–32110
Tightening torque
Gear shift guide case bolt (a): 23 N·m (2.3 kgf-
m, 17.0 lb-ft)
4) Tighten select lever bracket bolt (5) with select lever
bracket.
Tightening torque
Select lever bracket bolt (c): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
5) Install washer and gear shift interlock bolt (3) to
which thread lock cement has been applied and then
tighten it to specified torque.
“A”: Thread lock cement 99000–32110
Tightening torque
Gear shift interlock bolt (b): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
6) Install washer and 5th to reverse interlock guide bolt
(4) to which thread lock cement has been applied
and then tighten it to specified torque.
“A”: Thread lock cement 99000–32110
Tightening torque
5th to reverse interlock guide bolt (d): 23 N·m (
2.3 kgf-m, 17.0 lb-ft)
7) Tighten back up lamp switch (1) referring to “Back
Up Lamp Switch Removal and Installation”.
8) Check input shaft for rotation in each gear position.
9) Also confirm function of back up lamp switch in
reverse position by using ohmmeter.
4. Transaxle side cover
I2RH01520027-01
I3RH0A520008-01