Suzuki Liana RH413, Руководство по обслуживанию

Страница: 697 / 1302

Automatic Transmission/Transaxle: 5A-149
45) After applying A/T fluid to reverse clutch drum thrust
bearing (1), install it to forward and reverse clutch
assembly (2).
46) Remove sealant attached to mating surface of
transaxle rear cover (1) completely.
47) Apply sealant to mating surface of transaxle rear
cover (1) by using a nozzle (2) as shown in figure by
such amount that its section is 1.2 mm (0.047 in.) in
diameter.
“A”: Sealant 99000–31230
48) Install transaxle rear cover assembly on transaxle
case.
49) Tighten rear cover bolts (1).
Tightening torque
Rear cover bolt (a): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
50) Install transaxle hook (2) to location shown in figure
and tighten nut (3).
Tightening torque
Transaxle hook nut (b): 18 N·m (1.8 kgf-m, 13.0
lb-ft)
51) Install fluid reservoir LH plate (1).
Tightening torque
Fluid reservoir LH plate bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)
52) After applying A/T fluid to new governor apply No.2
gasket (1), install it to transaxle case.
53) After applying A/T fluid to differential assembly (1)
and countershaft assembly (2), install them to
transaxle case.
I2RH0B510300-01
“A”
2
1
I2RH0B510301-01
I2RH0B510302-01
I2RH0B510303-01
I2RH0B510304-01