Suzuki Liana RH413, Руководство по обслуживанию

Страница: 231 / 1302

Engine Mechanical: 1D-26
7) Remove housing, and using scale (2) on gauging
plastic envelop, measure gauging plastic (1) width at
its widest point.
Camshaft journal clearance
Standard: 0.045 – 0.087 mm (0.0018 – 0.0034 in.)
Limit: 0.12 mm (0.0047 in.)
If measured camshaft journal clearance exceeds
limit, measure journal (housing) bore and outside
diameter of camshaft journal. Replace camshaft or
cylinder head assembly whichever the difference
from specification is greater.
Camshaft journal specification
Wear of Tappet and Shim
Check tappet and shim for pitting, scratches or damage.
If any malcondition is found, replace.
Measure cylinder head bore and tappet outside diameter
to determine cylinder head-to-tappet clearance. If
clearance exceeds limit, replace tappet or cylinder head.
Cylinder head to tappet clearance
Standard: 0.025 – 0.066 mm (0.0010 – 0.026 in.)
Limit: 0.15 mm (0.0059 in.)
Tappet outside diameter [A]
Standard: 30.959 – 30.975 mm (1.2189 – 1.2195 in.)
Cylinder head tappet bore [B]
Standard: 31.000 – 31.025 mm (1.2205 – 1.2215 in.)
Item Standard
Camshaft journal
diameter [A]
No.1 26.934 – 26.955 mm
(1.0604 – 1.0612 in.)
Other 22.934 – 22.955 mm
(0.9029 – 0.9037 in.)
Camshaft journal
bearing bore [B]
No.1 27.000 – 27.021 mm
(1.0630 – 1.0638 in.)
Other 23.000 – 23.021 mm
(0.9055 – 0.9063 in.)
I2RH0B140083-01
I2RH0B140084-01
I2RH0B140085-01
I2RH0B140086-01