Suzuki Liana RH413, Руководство по обслуживанию

Страница: 431 / 1302

Differential: 3B-18
Special tool
(E): 09922-75222
(F): 09930-40113
Tightening torque
Bevel pinion nut: 100 – 300 N·m (10.0 – 30.0 kgf-
m, 72.5 – 217.0 lb-ft)
Bevel pinion bearing preload (Bevel pinion
rotational torque)
5 – 13 kg-cm (4.4 – 11.2 lb-in.)
Rotational force with special tool
1.0 – 2.6 kg (2.2 – 5.7 lb)
Specifications
Tightening Torque Specifications
S3RH0A3207001
NOTE
The specified tightening torque is also described in the following.
“Rear Differential Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
3. Spring balance (1 – 5 or 1 – 10 kg range)
4. Flange bolt
I3RH0A320007-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Oil drain plug 21 2.1 15.5 )
Oil level/filler plug 21 2.1 15.5 )
Differential front mounting bracket bolts 50 5.0 36.5 ) / )
Differential front mounting nut 80 8.0 58.0 )
Differential rear mounting bracket bolt 50 5.0 36.5 )
Differential rear mounting bolt 80 8.0 58.0 )
Stabilizer bar mount bolt 23 2.3 17.0 )
Differential rear mounting bracket bolts 50 5.0 36.5 )
Propeller shaft flange bolts 23 2.3 17.0 )
Rear control rod outer bolts 90 9.0 65.0 )
Rear trailing rod rear bolts 90 9.0 65.0 )
Parking cable wire mounting bolts 10 1.0 7.5 )
Rear drive shaft nuts 175 17.5 126.5 )
Wheel nuts 85 8.5 61.5 )
Bevel gear bolt 73 7.3 52.0 )
Retainer stopper bolt 10 1.0 7.5 )
Breather cover bolt 6.0 0.6 4.5 )
Differential cover bolts 23 2.3 17.0 )
Front case bolts 23 2.3 17.0 )
Bevel pinion nut 100 – 300 10.0 – 30.0 72.5 – 217.0 )