Suzuki Liana RH413, Руководство по обслуживанию

Страница: 437 / 1302

Transfer: 3C-4
20) Remove mounting (1) and breather hose (2) from
transfer assembly.
Remounting
Remount transfer assembly by reversing dismounting
procedure noting the following points.
• Tighten bolts and nuts to specified torque as follows.
Tightening torque
Engine rear mounting bracket nuts (a): 25 N·m (
2.5 kgf-m, 18.0 lb-ft)
Transfer mounting bolts (b): 50 N·m (5.0 kgf-m,
36.5 lb-ft)
Transfer to engine stiffener bolts (c): 50 N·m (5.0
kgf-m, 36.5 lb-ft)
Transfer to transaxle stiffener bolts (d): 50 N·m (
5.0 kgf-m, 36.5 lb-ft)
Propeller shaft No.1 bolts (e): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
Exhaust No.2 pipe to muffler bolts (f): 43 N·m (4.3
kgf-m, 31.5 lb-ft)
Suspension frame bolts (g): 90 N·m (9.0 kgf-m,
65.0 lb-ft)
Engine rear mounting nuts (h): 45 N·m (4.5 kgf-
m, 32.5 lb-ft)
Ball stud lock nuts (i): 60 N·m (6.0 kgf-m, 43.5 lb-
ft)
Exhaust No.2 pipe to No.1 pipe bolts (j): 43 N·m (
4.3 kgf-m, 31.5 lb-ft)
Exhaust No.1 pipe to exhaust manifold bolts (k):
50 N·m (5.0 kgf-m, 36.5 lb-ft)
Wheel nuts: 85 N·m (8.5 kgf-m, 61.5 lb-ft)
2
1
I3RH01332008-01
(a)
(b)
(b)
(c)
(d)
(d)
(f)
(e)
(e)
(h)
(g)
(j)
(i)
(k)
(k)
I3RH0A330002-01