Suzuki Liana RH413, Руководство по обслуживанию

Страница: 762 / 1302

5C-1 Clutch:
Transmission / Transaxle
Clutch
General Description
Clutch Construction
S3RH0A5301001
The clutch is a hydraulically controlled diaphragm spring clutch of a dry single disc type. The diaphragm spring is of a
tapering-finger type, which is a solid ring in the outer diameter part, with a series of tapered fingers pointing inward.
The disc, carrying four torsional coil springs, is positioned on the transmission input shaft with an involute spline fit.
The clutch cover is secured to the flywheel, and carries the diaphragm spring in such a way that the peripheral edge of
the spring pushes on the pressure plate against the flywheel (with the disc in between), when the clutch release
bearing is held back. This is the engaged condition of the clutch.
Depressing the clutch pedal causes the release bearing to advance and pushes on the tips of the tapered fingers of
the diaphragm spring. When this happens, the diaphragm spring pulls the pressure plate away from the flywheel,
thereby interrupting the flow of drive from flywheel through clutch disc to transaxle input shaft.
I2RH01530001-01
1. Clutch cover 5. Release shaft 9. Input shaft bearing
2. Pressure plate 6. Transmission right case 10. Input shaft
3. Diaphragm spring 7. Clutch disc 11. Crankshaft
4. Release bearing 8. Torsional spring 12. Flywheel