Installation and User Manual
EtherHaul
1200™
Page 148
EH-INST-02, Issue 4.0
Use the following command to display the NTP settings:
show ntp [{<idx> | all}[{server | tmz | info}]]
* tmz = Time Zone Shift
ntp 1 server : 192.168.0.222
ntp 1 tmz : 2
Right_Master>
Use the following command to clear the NTP settings:
set ntp 1 server 0.0.0.0 tmz 0
Figure
9-14 NTP Screen
9.12
Viewing User Activity Log
The ODU stores a log of all activities performed on the ODU.
Information recorded:
Date, Time, Type (CLI, SNMP), User Name and the command.
Upon execution of each SNMP set request, a CLI command functionally
equivalent to the SNMP set request will be constructed and added to the
log.
In case of SNMPv2 the write community name will be put into the log as the
user name.
In case of SNMPv3 the message user name will be put into the log.
Example:
Left-13>show user-activity-log
Dec 23 08:09:44 sw cad: User: cli admin : set rf tx-mute enable
Dec 23 08:10:05 sw cad: User: cli admin : set rf tx-mute disable
Dec 23 08:12:24 sw cad: User: cli admin : clear log
Dec 23 08:16:08 sw cad: User: cli admin : copy sw ftp://192.168.0.254/pub/siklu-
uimage-30-5444
Dec 23 08:45:48 sw cad: User: cli tech : run sw immediate no-timeout
