Installation and User Manual
EtherHaul
1200™
Page 228
EH-INST-02, Issue 4.0
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
SNMP
Access
Value
MTU Size
The size of the largest packet which
can be sent/received on the
interface, specified in octets. For
interfaces that are used for
transmitting network datagrams,
this is the size of the largest
network datagram that can be sent
on the interface.
ifMtu
(1.3.6.1.2.1.2.2.1.4)
RO
9216
MAC Address
The interface's address at its
protocol sub-layer.
ifPhysAddress
(1.3.6.1.2.1.2.2.1.6)
RO
The MAC address
of the
corresponding
Eth.
Administrative
Status
The desired state of the interface.
ifAdminStatus
(1.3.6.1.2.1.2.2.1.7)
RW (Only a
single
value is
allowed)
Up (1)
Operational
Status
The current operational state of the
interface.
The Down state of ifOperStatus has
two meanings, depending on the
value of ifAdminStatus:
If ifAdminStatus is not Down and
ifOperStatus is Down then a fault
condition is presumed to exist on
the interface.
If ifAdminStatus is Down, then
ifOperStatus will normally also be
Down i.e., there is not necessarily a
fault condition on the interface.
ifOperStatus
(1.3.6.1.2.1.2.2.1.8)
RO
Up (1) = Ready
to pass packets
Last Change Time
(lastchange)
The value of sysUpTime at the time
the interface entered its current
operational state. If the current
state was entered prior to the last
reinitialization of the local network
management subsystem, then this
object contains a zero value.
ifLastChange
(1.3.6.1.2.1.2.2.1.9)
RO
0
Name
The textual name of the interface.
ifName
(1.3.6.1.2.1.31.1.1.1.1)
RO
ASCII
representation of
the VLAN ID
State Trap
Indicates whether linkUp/linkDown
traps should be generated for this
interface.
ifLinkDownTrapEnabl
e
(1.3.6.1.2.1.31.1.1.1.14
)
RW (only a
single
value is
allowed.)
Disabled (2)
High Speed
Indication
An estimate of the interface's
current bandwidth in units of
1,000,000 bits per second.
ifHighSpeed
(1.3.6.1.2.1.31.1.1.1.15
)
RO
1000
