Installation and User Manual
EtherHaul
1200™
Page 200
EH-INST-02, Issue 4.0
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Syntax
Access
Default
Primary VLAN
(vlan)
An integer indicating the Primary
VID of the MEP. A value of 0
indicates that either the Primary
VID is that of the MEP's MA, or that
the MEP's MA is not associated with
any VID.
The associated VLAN must be
defined in the VLAN Table (
Table
11-28
). In addition, only one MEP
can be defined for the same
combination of Interface, Direction
and Primary VLAN.
1.3.111.2.802.1.1.8.
1.7.1.1.4
(dot1agCfmMepPri
maryVid)
0..4094
RC
0
Administrative
State (admin-
state)
The administrative state of the MEP.
True (active) indicates that the MEP
is to function normally; False
(inactive) indicates that the MEP is
to cease functioning.
1.3.111.2.802.1.1.8.
1.7.1.1.5
(dot1agCfmMepAct
ive)
{active | inactive}
RC
Inactive
CCI (cci)
If set to True, the MEP will generate
CCM messages.
1.3.111.2.802.1.1.8.
1.7.1.1.7
(dot1agCfmMepCci
Enabled)
{enabled | disabled}
RC
disabled
Message Priority
(msg-prio)
The priority value for CCMs and
LTMs transmitted by the MEP. The
default value is the highest priority
value allowed passing through the
Bridge Port for any of the MEP VIDs.
The Management Entity can obtain
the default value for this variable
from the priority regeneration table
by extracting the highest priority
value in this table on th
is MEP’s
Bridge Port (1 is lowest, followed by
2, then 0, then 3-7).
1.3.111.2.802.1.1.8.
1.7.1.1.8
(dot1agCfmMepCc
mLtmPriority)
0..7
RC
0
Lowest Primary
Defect (low-
defect)
An integer specifying the lowest
priority defect that is allowed to
generate a fault alarm.
1.3.111.2.802.1.1.8.
1.7.1.1.10
(dot1agCfmMepLo
wPrDef)
{all-def | mac-rem-err-
xcon | rem-err-xcon |
err-xcon | xcon | no-
xcon}
RC
mac-rem-
err-xcon
Alarm Time
(alarm-time)
The time that a defect must be
present before a fault alarm is
issued.
1.3.111.2.802.1.1.8.
1.7.1.1.11
(dot1agCfmMepFn
gAlarmTime)
250..000
RC
250
Reset Time (reset-
time)
The time that a defect must be
absent before resetting a fault
alarm.
1.3.111.2.802.1.1.8.
1.7.1.1.12
(dot1agCfmMepFn
gResetTime)
250..1000
RC
1000
