Installation and User Manual
EtherHaul
1200™
Page 226
EH-INST-02, Issue 4.0
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Access
Default
PEP Default User
Priority (prio)
An integer range 0-7 to be used for
untagged frames received at the
Provider Edge Port.
ieee8021PbEdgePortDef
aultUserPriority
(1.3.111.2.802.1.1.5.1.3.
1.3)
0..7
RC
None
PEP Acceptable
Frame Types
(admit)
The frame types that will be accepted
upon receipt at the PEP.
ieee8021PbEdgePortAcc
eptableFrameTypes
(1.3.111.2.802.1.1.5.1.3.
1.4)
All= Admit all
untagged and
priority-tagged
frames.
Untagged= Admit
untagged frames
only.
Tagged= Admit
tagged frames only.
RC
All
PEP Ingress
Filtering (filter)
The ingress filtering state of the PEP.
When enabled, the device discards
incoming frames for VLANs that do not
include the port in its Member Set.
When disabled, the device accepts all
incoming frames to the port.
ieee8021PbEdgePortEna
bleIngressFiltering
(1.3.111.2.802.1.1.5.1.3.
1.5)
Enabled, Disabled
RC
Disable
d
11.12.12S-VID Translation Table Attributes
Table
11-31 S-VID Translation Table Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Access
Default
Bridge Port
The bridge port for the VID Translation
Table entry.
ieee8021BridgeBasePort
(1.3.111.2.802.1.1.2.1.1.
4.1.2)
host, eth0, eth1, eth2
N/A
N/A
Local S-VID (local-
svid)
The internal S-VID on received
(transmitted) at the ISS of a CNP or
PNP.
The VID must be defined in the VLAN
Table (Table
11-28) and the Bridge
Port specified in the command must
belong to the S-component.
Because VID translation is
bidirectional, two entries cannot use
the same Local S-VID for the same port.
Figure
11-3 shows the bidirectional
relationships for Local S-VID.
ieee8021PbVidTranslati
onLocalVid
(1.3.111.2.802.1.1.5.1.1.
1.1)
1..4094
N/A
N/A
