Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 193
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Default
Lowest
Modulation
Dropping below the Lowest Mode causes RF link failure, wherein:
mod = Modulation type. {QPSK, QAM16, QAM64}
scnum = The number of subchannels [1..4]
rep = Repetition {1, 2, 4}
fec = FEC {0.5, 0.67, 0.8}
frame = The frame number to be used for the execution of the new modulation (only in static mode)
The mode must be present in the Modulation Table
Table
11-4 Static Mode Sub-Parameters
Argument
Description
Values
SNMP Reference
modu
modulation
QPSK, QAM16, QAM64
rfModulationType (1.3.6.1.4.1.31926.2.1.1.7)
num-subch
Number of subchannels
1..4
rfNumOfSubchannels (1.3.6.1.4.1.31926.2.1.1.8)
repete
Repetitions
1, 2, 4
rfNumOfRepetitions (1.3.6.1.4.1.31926.2.1.1.9)
fec
FEC rate
0.5, 0.67, 0.8
rfFecRate (1.3.6.1.4.1.31926.2.1.1.10)
Table
11-5 Read-Only RF Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Default
Channel Width
(channel-width)
The channel width, expressed in
MHz.
rfChannelWidth
(1.3.6.1.4.1.31926.2.1.1.3)
250
N/A
RX State (rx-state) The current state of the RF receive
link.
rfRxState
(1.3.6.1.4.1.31926.2.1.1.25)
1= Sync
2= Search countdown
3= Found countdown
4= Normal
N/A
TX State (tx-state) The current state of the RF transmit
link.
rfTxState
(1.3.6.1.4.1.31926.2.1.1.24)
1= Sync
2= Search countdown
3= Found countdown
4= Normal
N/A
Operational State
(operational)
The current operating state of the
RF device.
rfOperationalState
(1.3.6.1.4.1.31926.2.1.1.17)
up, down
N/A
Average CINR
Average carrier to interference
noise ratio [-6..30]
This object is only accessible via
SNMP.
rfAverageCinr
(1.3.6.1.4.1.31926.2.1.1.18)
integer
Average RSSI
Average received signal strength
indication, measured in DB. [-100..-
60]
This object is only accessible via
SNMP.
rfAverageRssi
(1.3.6.1.4.1.31926.2.1.1.19)
integer
