Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 215
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Default
Operational Status
(operational)
The current operational state of the
interface, expressed as an integer.
When this attribute is in the Down state,
but the Administrative Status attribute
(
admin
) is in the Up state, then a fault
condition is presumed to exist on the
interface.
If the Administrative Status attribute
(
admin
) is in the Down state, then the
operational
attribute should also
be in the Down state.
If the Administrative Status attribute
(
admin
) changes to the Up state, then
the
operational
attribute should
also change to the Up state if the
interface is ready to transmit and
receive network traffic. it should remain
in the Down state if and only if there is a
fault condition that prevents the
interface from going to the Up state.
ifOperStatus
(1.3.6.1.2.1.2.2.1.8)
1 = Up (Ready
to pass
packets)
2 = Down (Not
available for
host0)
N/A
Last Change Time
(lastChange)
The value of sysUpTime at the time the
interface entered its current operational
state.
If the current operational state was
entered prior to the last reinitialization
of the local network management
subsystem, then the value of this
attribute is 0.
ifLastChange
(1.3.6.1.2.1.2.2.1.9)
ddd:hh:mm:ss,
where:
ddd
=decimal
integer
representing
days (it can be
an arbitrary
number of
digits)
hh
=two-digit
decimal
integer
representing
the hours of a
day [0..23]
mm
=two-digit
decimal
integer
representing
minutes of an
hour [0..59]
ss
=two-digit
decimal
integer
representing
seconds of a
minute [0..59]
N/A
Name (name)
The name of the interface.
ifName
(1.3.6.1.2.1.31.1.1.1.
1)
host, eth0,
eth1, eth2
None
