Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 199
11.11.4 Maintenance End Point (MEP) Object Attributes
This section includes separate tables for configurable MEP object attributes (
Table
11-12
) and read-only MEP object attributes (
Table
11-13
).
Table
11-12 Configurable MEP Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Syntax
Access
Default
MD Index
Value to be used as the index of the
MA table entries for the MD when
the management entity wants to
create a new entry in that table.
Entering the MD Index for a MEP
enables use of the common
command structure.
dot1agCfmMdIndex
(1.3.111.2.802.1.1.
8.1.5.2.1.1)
Integer
N/A
MA Index
Index of the MA table
(dot1agCfmMdMaNextIndex), which
needs to be inspected to find an
available index for row-creation. An
MA Index entry cannot be deleted if
it is used as the key in MA, MEP,
Received CCM Presentation, Peer
MEP Create or LTR DB.
dot1agCfmMaIndex
(1.3.111.2.802.1.1.
8.1.6.1.1.1)
N/A
MEPID
An integer that is unique for all the
MEPs in the same MA that identifies
a specific MA End Point.
Adding an entry with a specific
MEPID creates associated entries in
the Peer MEP DB. Similarly, deleting
a specific MEPID entry causes
deletion of association entries in the
Peer MEP DB.
1.3.111.2.802.1.1.8.
1.7.1.1.1
(dot1agCfmMepIde
ntifier)
integer
RC
1
Interface
(interface)
The index of the interface either of a
Bridge Port, or an aggregated IEEE
802.1 link within a Bridge Port, to
which the MEP is attached.
The component associated with the
MEP interface must exist in the
Component MA Table. In addition,
only one MEP can be defined for the
same combination of Interface,
Direction and Primary VLAN.
1.3.111.2.802.1.1.8.
1.7.1.1.2
(dot1agCfmMepIfIn
dex)
{eth0 | eth1 | eth2 |
host}
RC
eth1
Direction (dir)
The direction in which the MEP is
facing on the Bridge Port. Only one
MEP can be defined for the same
combination of Interface, Direction
and Primary VLAN.
1.3.111.2.802.1.1.8.
1.7.1.1.3
(dot1agCfmMepDir
ection)
{up | down}
RC
down
