Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 89
7.2.3
Working with Maintenance Associations
A Maintenance Association (MA) is used to monitor connectivity in relation to a specific
service instance. All CFM entities that support that service instance are configured as
MEPs, with the same Maintenance Association Identifier (MAID) and MD Level.
Use the following command to set an MA. Note that the
ma-name
attribute is
mandatory, and must be unique in the system.
set cfm-ma <md-idx> <ma-idx> [format <ma-name-format>] [name <ma-
name>] [interval <ccm-interval>]
Use the following command to display a particular MA or all MAs:
show cfm-ma {<md-idx-list> | all} {<ma-idx-list> | all} {name |
component | interval | info}
Use the following command to clear a particular MA or all MAs:
clear cfm-ma {<md-idx-list> | all} {<ma-idx-list> | all}
Figure
7-9 CFM MA Setup
Table
11-10
on page 197 lists and describes the MA attributes.
7.2.4
Working with Component Maintenance Associations
Use the following command to set a Component MA:
set cfm-ma-comp <comp-id> <md-idx> <ma-idx> [vlan <vid>] [mhf-
creation <mhf-creation>] [mhfid-permission <mhf-permission>]
Use the following command to display a particular Component MA or all Component
MAs:
show cfm-ma-comp {<comp-id-list | all} {<md-idx-list> | all} {<ma-
idx-list> | all} {vlan | mhf-creation | mhfid-permission | info}
Use the following command to clear a particular Component MA or all Component MAs:
clear cfm-ma-comp {<comp-id-list | all} {<md-idx-list> | all}
{<ma-idx-list> | all}
