Installation and User Manual
EtherHaul
1200™
Page 52
EH-INST-02, Issue 4.0
4.5.1
Displaying Radio Parameters and Status Using the CLI
Use the
show rf
command to display the ODU’s current radio status and parameter
settings.
Local_Site>show rf
rf operational : up
rf tx-state : normal
rf rx-state : normal
rf cinr : 19
rf rssi : -43
rf channel-width : 500
rf frequency : 74375
rf role : auto
rf role-status : master
rf mode : adaptive qam64 4 1 0.5
rf alignment-status : inactive
rf lowest-modulation : qpsk 1 4 0.5
rf tx-asymmetry : 50tx-50rx
rf rx-link-id : 0
rf tx-link-id : 0
rf temperature : 52
rf loopback-timeout : 60
rf loopback : disabled
rf tx-power : 5
Table
11-3
on page 192 lists and describes the configurable RF attributes.
Table
11-5
on
page 193 lists and describes the read-only RF attributes.
4.5.2
Configuring the Radio Parameters Using the CLI
Set rf
[frequency {71375 | 71875 | 72375 | 72875 | 73375 | 73875 |
74375 | 74875 | 75375}]
[role {master | slave | auto}]
[f tx-mute {disable | enable}]
[tx-mute-timeout <integer 0..86400>]
[mode {static <modulation> <subchannels> <repetitions> <fec-rate> - (from list of
modulations) | alignment | adaptive}]
[lowest-modulation {<modulation> <subchannels> <repetitions> <fec-rate> - (from
list of modulations)}]
[tx-asymmetry
for master use 50tx-50rx, 75tx-25rx, 90tx-10rx
for slave use 50tx-50rx, 25tx-75rx, 10tx-90rx}]
[tx-link-id <integer 0..127>]
