Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 49
4.2
Saving Configuration Changes and Resetting the System
Using the CLI
Whenever you make changes to the ODU configuration, you must save the config uration
changes to the startup configuration. If you do not save the configuration, the changes
will be lost the next time the system is reset. Use the following command to save
configuration changes to the startup configuration:
Local_Site> copy running-configuration startup-configuration
To reset the system, use the
reset system
command. You must reset the system
whenever you exit Alignment mode.
Local_Site> reset system
4.3
Configuring and Displaying Basic System Information Using
the CLI
Use the
set system name
command to set the ODU’s name. Once you set the ODU’s
name, a prompt appears with the name you just set, the date, and the time.
Default> set system name Local_Site
Local_Site>
To set system date & time, use the following command:
Local_Site> set system date 2011.01.18 time 15:08:00
Use the
show system
command to display basic information about the ODU.
Local_Site>show system
system description : EH-1200
system snmpid : 1.3.6.1.4.1.31926
system uptime : 0000:00:05:10
system contact : undefined
system name : Local_Site
system location : undefined
system voltage : 55 dc
system temperature : 39
system date : 2011.01.18
system time : 15:08:06
system cli-timeout : 15
