5 Introduction of operation and running SV800/SV800A User Manual
64
5) Rotate the knob clockwise for 6 times to make the display become---6;
6) Press the ENTER key, it will save the modified parameter value and display the next function
code A0-02;
7) Rotate the knob anticlockwise to reduce A0-02 to A0-01;
8) Repeat the steps of 4 to 6;
9) When frequency converter is powered down or without operation of the keyboard for 3
minutes, the set password will become effective.
Fig. 5-4 Password setting
Parameter uploading:
1) Press the MENU key under the initial state (0-level menu) to display the current function
group number A0;
2) Press the ENTER key to display the current function code A0-00;
3) Rotate the knob clockwise to increase A0-00 to A0-07;
4) Press ENTER key and it will display 0;
5) Turn the knob clockwise and change 0 to 1;
6) Press ENTER key, it will display "ULoAd" and start to upload characters;
7) After the uploading finished, the keyboard will display A0-08;
8) Press MENU key, it will display A0 function code group number;
9) Press MENU key again, it will back to the 0-level menu;
10)The uploading parameters finished;
Fig. 5-5 Parameters upload procedure
0.40
MENU
A
0
A
0- 00
A0
0.40
MENU
MENU
A
0- 01
6
A
0- 02
A
0- 01
6
A
0- 02
ENTER
ENTER
ENTER
ENTER
ENTER
0.40
MENU
A
0
A
0- 00
A0
MENU
MENU
A
0- 07
1
ULoAd
A
0- 08
0
ENTER
ENTER
ENTER
0.40
