SCHOTT ProLab 4000 Скачать руководство пользователя страница 49

Страница: 49 / 228

ProLab 4000

Access to the meter

ba75646e03

12/2012

5.3

Password for login

If the used of a password for login to the meter was set by the admin-
istrator, each user has to enter his or her password during the login.

The

ProLab 4000

is delivered with the password "00001" for the user

name, Administrator .

Change this password as soon as possible.

5.3.1

Changing the password

All users can change their own password.
A valid password consists of at least 5 characters.

5.3.2

Assigning a password

During the first login with the new user name the

Change password

window appears. Here the password is set by the user. A valid pass-
word consists of at least 5 characters.

5.3.3

Forgotten the password?

If the access control requires the entry of a password, access to the
meter is not possible without the password.

Users

The administrator can delete the password for user profiles (see
page 53).

Open the

User

Change password...

menu.

The

Change password

window opens.

The old password is in the

Old password

field.

Enter the new password in the

New password

field.

Enter the new password once again in the

Confirm password

field.

Confirm the new password with

[OK]

The password is changed.
The

Change password

window is closed.

Содержание ProLab 4000





































































































































































































































Результаты поиска

Содержание ProLab 4000

Отзывы:

SCHOTT ProLab 4000, Руководство по эксплуатации, Страница: 49 / 228

Результаты поиска

Содержание ProLab 4000

Отзывы: