SCHOTT ProLab 4000, Руководство по эксплуатации

Страница: 177 / 228

ProLab 4000 Recorder
177 ba75646e03 12/2012
12.5.1 Defining the recording interval
The Recording interval defines at which intervals the measured values
are recorded.
12.5.2 Specifying the axes of the system of coordinates
The appearance of the recorder is specified by specifying the axes of
the system of coordinates:

Time axis of the measured value recording:
The time period entered in the field,
Displayed time period is dis-
played including the last recorded measured value.

Measured value and temperature value axis
– Axis type (linear or logarithmic)
– Resolution of the axis for measured values
The number in the Decimal places field specifies with how many
decimal places the measured value scale should be labeled.
– Minimum and maximum measured value
Here you define the part of the measured value and temperature
you want to keep in view such as pH 0 to pH 14.
– Scaling of the axes ( Axis scale, rough and fine )
In the Axis scale, rough field you specify how often the measured
value scale should be divided between the minimum and maxi-
mum value.
In the
fine field you specify how often an axis intercept of the
rough scaling should be divided.
You can view the entire progress of the recording regardless of the set-
tings at any time (see page 181).
1 Open the recorder menu, Settings...Settings... .
The Recorder settings window pops up.
2 Select the Time register for the entry of the recording interval.
3 Select the interval.
4 Use [OK] to accept the new settings and close the dialog box,
Recorder settings .
The new settings are active.
or
Select another register to make further settings.