SCHOTT ProLab 4000, Руководство по эксплуатации

Страница: 155 / 228

ProLab 4000 Conductivity
155 ba75646d03 12/2012
Note
The measuring method can only be started if Ref. temp. , Start temp.
and Temp. interval are selected so that the reference temperature cor-
responds to the nominal temperature of a measuring point: Ref. temp.
= Start temp. + x* Temp. interval
5 Enter the start temperature, end temperature and temperature
interval.
Enter the number of standards and confirm with
[Continue] .
The display shows:

the current conductivity value

the current temperature

information on the nominal temperature of the next measur-
ing point and the temperature difference between the cur-
rent temperature and the nominal temperature
6 Warm or cool the measuring solution (standard 1) to the start
temperature
Start temp. .
As soon as the temperature of the measuring point is achieved
and a stable value is recognized, the measurement is automat-
ically started and the dataset stored.
After the measurement, a piece of information about the next
measuring point with the relevant nominal temperature is dis-
played and the temperature difference between the current
temperature and the nominal temperature.