MorphoAccess® SIGMA Family Administrator Guide
MorphoAccess® Terminal First Boot Assistant
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
68
July 17
Figure 33:
Entering in WLAN – IP Configuration
8.
On WLAN screen select “IP Configuration” to set up the IP which is required to be
connected through WLAN
9.
Select IPV 4 or IPV 6
Figure 34:
WLAN – IP Configuration
10.
An administrator can select IP Mode as ‘Static’ or ‘DHCP’
a.
If IP Mode is ‘Static’, then enter parameters such as IP Address, Subnet Mask,
Gateway Address, Preferred DNS Address and Alternate DNS Address
b.
If IP Mode is ‘DHCP’, then IP address is allocated automatically to the terminal
11.
Click on the Check button “
” to save the setting