MorphoAccess® SIGMA Series - Administrator Guide
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
404
July 17
The last received input Wiegand frame format can be applied on the output Wiegand
format, as defined in “Complete control configuration”. This can be activated by
applying the value, “Wiegand Last Format Input” to “Wiegand event Verification fail”
or “Wiegand event Verification pass” configuration. Please refer to Wiegand
Propagation section in MA SIGMA - Application note - Wiegand formats, for more
information. Kindly follow the notes mentioned below :
1.
It is mandatory to define custom format slot 0 to enable “Wiegand Last
Format Input”.
2.
If trigger source for authentication is keyboard or distant command, the
Wiegand last format output will considered as per custom slot_0.
3.
If External Port Input Type and Output Type is selected as Clock & Data, then configure
Clock & Data parameters:
a.
Select Input Data Line as Low or High
b.
Select Output Data Line as Low or High
c.
Select Input Clock Line as Low or High
d.
Select Output Clock Line as Low or High
4.
Click on Save