Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 372 | Manualshive

Страница: 372 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 372

MorphoAccess® SIGMA Series - Administrator Guide

Access Control by Authentication

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

372

July 17

User Interface

The authentication process starts when the user presents his contactless card in front of the
terminal (where the antenna of the contactless card reader is located). If it is compatible (same
authentication keys, and mandatory data present on card), the user is invited to enter the PIN,
for PIN Verification.

Figure 327:

Authentication with user's PIN Code and fingerprints on contactless card

The user is expected to put his finger on the biometric sensor for (biometric)  authentication,
provided  PIN  Code  is  verified,  and  biometric  check  is  enabled.  The  terminal  compares  the
biometric  data  of  the  finger  placed  on  the  sensor,  with the  reference biometric data  on the
user’s card.

The authentication process is successful (identity confirmed) if the PIN is verified and the
captured finger data matches with one of the two reference finger data. The authentication
process fails (identity not confirmed), if the pin and/or biometric data does not match.

The result of the authentication process is notified to the user by a specific signal, as described
in “Terminal States” section.

The terminal reverts to its initial state, when the authentication process is completed,
irrespective of its outcome. This implies that the terminal will now look for another card
detection.

Step 1: Present Card

Step 2: Enter PIN

Verified

Step 3: Place finger

Verified

«
...
370
371
372
373
374
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов