MorphoAccess® SIGMA Family Administrator Guide
MorphoAccess® Terminal Administration Menu
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
246
July 17
3.
Door Open Schedule: This parameter indicates, whether terminal should check the
door open schedule of the enrolled user
4.
Authorized List Check Mode: At the time of enrolment the administrator can set
whether the user is an authorized user or not. Authorized user does not need to
provide biometric verification
5.
Expiry Date Check: this parameter indicates, whether terminal should check the expiry
date of the enrolled user
6.
Job Code Check Activation: When the administrator enables this parameter, each
time the user tries to access, user will have to place finger as well provide Job Code
for verification. The administrator can set a job code for a given user at the time of
enrollment.
Note: When the Time and Attendance mode is enabled, entering the job code during
authentication is optional even though the Job Code Check is enabled. It is based on
the value of the parameter time_and_attendance.jobcode_by_key and selected time
and attendance key during authentication.
7.
Job Code Check Duration: this parameter indicates the duration within which user will
be required to enter the job code after a biometric check. If user fails to enter job code
within this duration, the terminal will deny access.
8.
Face Detection Mode: The administrator can configure face authentication check rule
as depicted in the snapshot below.
Figure 219:
Enable or Disable Face detection mode