MorphoAccess® SIGMA Family Administrator Guide
MorphoAccess® Terminal Administration Menu
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
225
July 17
1.
Select Authorized IP address Configuration
Figure 196:
Authorized IP addresses Mode selection
2.
The administrator can set the Authorized IP Mode as ON or OFF. If this is set as OFF,
then any IP address is allowed to connect and communicate with the terminal. If this is
set as ON, then the administrator requires adding IP addresses that are authorized to
communicate with the terminal.
Add Authorized IP Address
The administrator can add several IP addresses which are authorized to communicate with the
terminal, by using this function.
1.
Enter IP Addresses by selecting required protocol, i.e. IPV4 or IPV6
Figure 197:
Adding IP for authorization
2.
Select Add IP Address