MorphoAccess® SIGMA Series - Administrator Guide
Access Control by Authentication
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
364
July 17
Because of above change in access rule workflow, to achieve L1 use case of disabling BIO check
for certain user, follow below procedure
Disable the terminal biometric check
Enable BIO check in user rule for all the users
Disable BIO check for the user for whom BIO check needs to be bypassed
Above workflow is achieved in L1 terminal by just disabling BIO check for users for whom BIO
checks needs to be bypassed and for all other users keep user rule to default.
When the administrator has enabled the Bypass Biometric Check in a user profile, terminal
will behave as below:
The terminal doesn’t require the user to place a finger on the biometric sensor. The
access is granted without a biometric check.
According to the authentication process selected, the terminal doesn’t perform any
check on the user’s identifier, as described in section “No biometric check, no User ID
check”
The terminal checks that the user’s identifier is in the terminal database, as specified in
the section “Biometric check and biometric data in local database”