Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 414 | Manualshive

Страница: 414 / 517

Safran MorphoAccess SIGMA Series Скачать руководство пользователя страница 414

MorphoAccess® SIGMA Series - Administrator Guide

2017_2000025464-v03

This document and the information therein are the property of Morpho. They must not

be copied or communicated to a third party without the prior authorization of Morpho

414

July 17

The selected function is written in the access request record, stored in the log file, and included
in the "User Identifier" message sent to a distant system.

After selection, the MorphoAccess® SIGMA Family terminal switches in biometric mode
(identification or authentication).

The selected function is written in the log file and sent to the host. For extended time
attendance, the code of the pressed key is logged (i.e. 0x31 for key 1, 0x32 for key 2 …).

If the user has selected the wrong operation (IN/OUT...), back button “

” can be used at any

moment during wait for a finger or a card, to abort the verification. In this case, nothing is logged
or sent to the controller.

After 20 seconds of inactivity on identification mode (no finger detected on the sensor), the
terminal switches back to the selection screen. In this case the operation result is logged and/or
sent to the controller (result = timeout).

Parameter Configuration

Time and Attendance Extended Mode Selection

time_and_attendance.tna_extende
d_mode

When  Time  &  Attendance  extended  mode  is
enabled,  there  are  16  function  keys  that  are
configurable  and  displayed  to  user  to  select
from.

If an administrator selects parameter value as
0, the extended mode is disabled. If disabled,
then T&A will be by default on normal mode
where only 4 F keys are displayed.

If an administrator selects parameter value as
1 (1x16 on 1 screeen) or 2 (2x8 on 2 screens),
the extended mode is enabled.

«
...
412
413
414
415
416
...
»

Содержание MorphoAccess SIGMA Series






































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов