MorphoAccess® SIGMA Series - Administrator Guide
Terminal Configuration through Webserver
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
336
July 17
Select Enroll ID Format
The administrator can set the User ID format to be encoded on card, using this functionality.
Access Path
Webserver > Control Configuration > Contactless Card > General Parameters > Enroll User ID
Screens & Steps
Figure 313:
Selecting Enroll User ID Format
1.
Select Enroll User ID Format
2.
Select User ID format used for enrolling users on card:
a.
No CSN: this value indicates that contactless card serial number will not be used
as User ID
b.
Standard CSN: If this option is selected, the contactless card serial number is
considered as User ID at the time of enrolment and authentication
c.
Reverse CSN: If this option is selected, the contactless card serial number read
in reverse byte order, is considered as User ID at the time of enrolment and
authentication
d.
4G User ID: If this option is selected, the read contactless card serial number is
manipulated as per 4G terminal. Manipulation is as per given below.
e.g.
Step 1: CSN read from the card.
If (ICLASS)
{
//Reverse all the bytes in case iClass card
}
Else
{
//Do not reverse