MorphoAccess® SIGMA Series - Administrator Guide
Compatibility with an Access Control System
2017_2000025464-v03
This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
469
July 17
Access Request Result Log File
Description
The administrator can enable this functionality so that, the terminal creates a record for each
access request in a local log file. Each record includes:
the date and the time of record creation (when access control result is known),
the User ID or in other words, user’s identifier (if available),
the access control process executed (Identification, Authentication with biometric
check, etc.),
the result of the access control, which can be granted or denied. If denied then the
reason could be user not recognized or access requested outside the authorized time
slot, for an instance).
and other data used for statistical reasons.
The format of a log record is described in the MorphoAccess® 5G Series – Host System Interface
Specifications document.
Log File management
Three commands are available for log file management:
a command which returns the current status of the log feature (enabled/disabled,
number of records),
a command which returns the content of the log file,
a command that deletes the log file.
For more information about these commands, refer to the MorphoAccess® 5G Series – Host
System Interface Specifications document.
Log File size
The capacity of the internal log file is customizable by installing “
Log licenses”. The maximum capacity and the default number of logs that can be saved depend
of the Series of terminal.
When the capacity off the internal log file is full, the logging process will stop automatically.
Depending on the terminal settings, a WARNING message may be sent to a distant system.