Safran MorphoAccess SIGMA Series, Руководство администратора, Страница: 196 / 517

MorphoAccess® SIGMA Family Administrator Guide
MorphoAccess® Terminal Administration Menu
2017_2000025464-v03 This document and the information therein are the property of Morpho. They must not
be copied or communicated to a third party without the prior authorization of Morpho
196
July 17
Figure 175: Configuring IP Address under Static IP Mode
11. The administrator can manually configure ‘IP Address’ of the terminal, ‘Subnet Mask’,
'Network Mask', 'Gateway Address' and 'DNS Servers under the Static IP Mode.
Results
Once the Ethernet Configuration is done, the terminal can be connected to a distant server. An
administrator can also configure parameters to prevent unauthorized access to the terminal.
These settings can be done from Security menu, refer “Network & Communication Security
Settings”.
Wi-Fi™ Network Configuration
MorphoAccess® SIGMA Family terminal can be connected to devices (such as central access
controller and door controller) via WLAN (Wi-Fi™ network). The terminal needs the Wi-Fi™
connection to make operations such as requesting access to the access controller and receiving
the result message.
At First Boot Assistant, an administrator can configure the terminal to communicate through
WLAN. For detailed description, please refer to “
Wi-Fi Network Configuration .
Mobile Network Configuration
MorphoAccess® SIGMA Family terminal can be connected to devices (such as central access
controller and door controller) via Mobile Network. Using Mobile Network connection, the
terminal can make access request to the access controller and receive result message.
The administrator can configure parameters to communicate through Mobile Network from
terminal.