Ross Synergy 100 MD, Руководство оператора

Страница: 175 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Peripheral Control and More • 10–5
Remote Aux Panels
Remote Aux Panels are one-piece panels that provide remote control (or monitoring) capability of
one (or more) of the Aux Buses on the Synergy 100 MD switcher. These panels are typically mounted
close to the destination devices to which they route their sources. Video does not flow through the
panels — the actual Aux Bus outputs originate from the frame using separate wiring paths to the
destination devices.
Using an Assignable Remote Aux Panel
An Assignable Remote Aux Panel controls or monitors all Aux Bus outputs. Assignable Remote
Aux Panels also include an Aux Bus Assign group that is used to select which Aux Bus the panel is
controlling. All panel types include a bright “on-air” or “active” LED that indicates (when lit) that the
Aux Bus controls a signal that forms a part of the program output.
In addition to crosspoints, the panels include dedicated “special” crosspoint buttons for Preview,
Clean Feed, and Program. When the Synergy 100 control panel is tracking sources being routed by a
Remote Aux Panel, the
MLE PV
,
CLN FEED
, and
PGM
crosspoints on the Remote Aux Panel
correspond to the first, second, and third Preview Bus crosspoints, respectively.
Assignable Remote Aux Panel
A single Remote Aux Panel can be configured for any of the of the 10 Aux Bus outputs. Each output
can be placed in one of two modes:
• Regular Mode — This mode places the specific Aux Bus in Regular (Normal) Mode.
The Bus can be selected and sources can be changed from the Synergy 100 control
panel.
• Follow Mode — This mode places the specific Aux Bus in Follow (View Only) Mode.
You can select the Bus in the Aux Bus Assign Group and follow what crosspoints are
being selected remotely, but you cannot change crosspoints. In Follow Mode, the Bus is
controlled from another location.
Consult with your facility engineer to learn what mode has been programmed for each Remote Aux
Panel in your facility. Refer to the chapter “
Remote Aux Panels ” of the Synergy 100 MD
Engineering Manual , for instructions on configuring your Remote Aux Panels.
BLACK SHIFT
MLE
PV
CLN
FEED
PGM PV
ASSIGN
1
ASSIGN
2
ASSIGN
3
ASSIGN
4
ASSIGN
5
ASSIGN
6
ASSIGN
7
ASSIGN
8
ASSIGN
9
ASSIGN
10
Tally
(Aux Bus "Active")
Crosspoint
or SHIFT
Special Aux Bus
Crosspoints
Aux Bus
Assign Group