Ross Synergy 100 MD, Руководство оператора

Страница: 204 / 402

11–22 • Global-Store Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Global-Store — Select Menu
3. Select the Global-Store channel you want to assign the still to as follows:
• Press
0. Channel
.
• Use the
ª
and
©
buttons to select the desired channel (
1
-
3
).
4. Select the still you want to adjust the on-air properties for as follows:
• Use the positioner to select the still you want to set as default.
• Press
1. Select
to assign the selected still to the Global-Store channel.
A loading progress indicator displays while the still is loading.
5. Press BACK to display the Global-Store Menu .
6. Press 2. Properties to display the On Air Properties Menu .
Global-Store — On Air Properties Menu
7. Adjust the properties of the still as desired. Refer to the section “ Adjusting On Air
Properties ” on page 11-17 for instructions on adjusting specific properties of the still.
8. Press. 5. Store Properties as Default to save the adjusted properties of the still as
default for that still.
Note As you select the channel you will notice that the Global-Store in the
top right corner changes to indicate what Global-Store channel you are
working in.
Operating
Tip
To navigate between directories, use the positioner to select the
directory you want to go down into and press
1. Select , or press the 4.
Up one level button to go up to the higher level directory. The
change will be shown in the Current directory:/ line at the bottom.
Current directory:/
Select
0. Channel 1
1. Select
2. Rename
3. Delete
4. Up one level
5. Cancel Still
NewDir/
Still1
Still2
Still3
Still4
Global-Store 1
Still1
Number: 53
Size: 1920×1080
Alpha: No
Frames: 1
MENU
Exit
On Air Properties
0. Position
1. Shaped
2. Display Mode
3. Reserved
4. Animation 5. Store Properties as Default
Use Positioner or HUE, SAT, LUM to modify