Ross Synergy 100 MD, Руководство оператора

Страница: 243 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Position/Crop Functions • 13–5
Channel Pivot Location
The Point of Rotation is the point in 3D space where the Key is rotated around. Before adjusting the
rotation of the channel, ensure your Point of Rotation or Pivot Point is set. You can set the Pivot
Point using a Pivot Preset or by selecting a location manually.
Pivot Preset
Choose the Pivot Preset option to select a preset pivot point for a channel (applies to channels only,
does not apply to objects).
Use the following procedure to set the point of rotation using a preset point:
1. Navigate to the Position/Crop Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
MENU
to display the Main Menu .
• Press
8. S&T MD
to display the S&T MD Menu .
• Press
0. Position/Crop
to display the Position/Crop Menu .
2. Press
2. Pivot Preset
to display the Pivot Preset Menu .
Position/Crop — Pivot Preset Menu
3. Use the HUE knob, or move the Positioner left and right , to select the Pivot Preset you
want to use.
This completes the procedure for setting the point of rotation using a preset point.
Operating
Tip
You can use the
POSN
hotkey to display the Position/Crop Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Pivot Preset: Center
Off
Off