Ross Synergy 100 MD, Руководство оператора

Страница: 353 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–29
• Use the
HUE
knob to adjust the amount of oscillation in the blowing sand.
• Use the
SAT
knob to adjust the velocity or wind speed.
• Use the
LUM
knob to adjust the direction of the wind.
Edge Peaks
The Edge Peaks parameters are accessed by pressing
7. Edge Peaks
on the Sand WARP Menu .
Sand WARP Menu — Edge Peaks
• Use the HUE knob to adjust the frequency or number of peaks at the edges of the effect.
• Use the SAT knob to adjust the size of the waves at the edges of the effect.
Edge Curves
The Edge Curves parameters are accessed by pressing
8. Edge Curves
on the Sand WARP Menu .
Sand WARP Menu — Edge Curves
• Use the
HUE
knob to adjust the slope of the waves at the edge of the effect.
• Use the
SAT
knob to move the edges of the waves across the image.
Split
This WARP has the following parameters that can be adjusted:
• Movement — This parameter adjusts direction and size of the split.
• Axis — This parameter adjusts the position and angle of the split.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Sand
6. Wind
7. Edge Peaks
8. Edge Curves
Sand
Edge Peaks:
Frequency:
1700
Amplitude: 1600
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Sand
6. Wind
7. Edge Peaks
8. Edge Curves
Sand
Edge Curves:
Slope:
0
Phase: 0