Ross Synergy 100 MD, Руководство оператора

Страница: 75 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Switcher Basics • 4–13
Fade to Black
The Fade to Black function allows you to perform an Auto Transition to Black for the entire Program
output of the switcher. It is the last effect that the switcher is capable of performing before the final
video signal is passed to the Program Output.
Video Flow Through the Switcher — Fade to Black
Performing a Fade to Black
Use the following procedure to perform a Fade to Black:
1. Set the Fade Rate for the Fade to Black as follows:
System Control Group — Fade Rate
• Press the SEL button in the System Control Group repeatedly until the word
FADE appears in the Mode Area .
• Use the 100 , 10 and 1 buttons to set the rate for the transition in frames.
Note
Fade to Black only affects the program output of the switcher. Aux Bus
outputs or Clean Feed outputs will not be affected by Fade to Black.
MLE Background
(Program/Preset Bus)
Effect Key 1
Switcher
Output
Input
Video
Effect Key 2
DSK 1
Multi-DSK 2
Multi-DSK 3
Fade to Black
S Y S T E M C O N T R O L
EDIT
SEL BACK MENU
100 10 1
FADE
1 2 0