Ross Synergy 100 MD, Руководство оператора

Страница: 203 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Global-Store • 11–21
Global-Store — Animation Menu
• Move the positioner
Left
or
Right
to turn
Looping
on (
Yes
) or off (
No
). When
looping is set to
Yes
an animation will start over at frame one when it finished.
• Move the positioner
Up
or
Down
to turn
Reverse
on (
Yes
) or off (
No
). When
reverse is set to
Yes
an animation will play in reverse when it reaches the end.
• Twist the positioner knob
Clockwise
or
Counter-Clockwise
to turn
AutoPlay
on (
Yes
) or off (
No
). When Autoplay is set to
Yes
an animation automatically start
to play when it is taken on-air.
This completes the procedure for adjusting the on-air properties of the stills in a Global-Store.
Storing Default Global-Store Properties
The on-air properties menu allows you to adjust the position, clip, gain, display mode, animation and
auto dissolve attributes of the selected still. You can also set any changes you make to the still as
default properties for that still.
Use the following procedure to store default still properties:
1. Navigate to the Global-Store Menu as follows:
• Press
MENU
to display the Main Menu .
• Press 0. Effects to display the Effects Menu .
• Press
6. Global-Store
to display the Global-Store Menu .
Global-Store — Main Menu
2. Press 0. Select to display the Select Menu .
MENU
Exit
On Air Properties
0. Position
1. Shaped
2. Display Mode
3. Reserved
4. Animation
Looping:
Reverse:
Autoplay: No
No
No
5. Store Properties as Default
Use Positioner or HUE, SAT, LUM to modify
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Global-Store Global-Store 1
0. Select
1. Manage
2. Properties
3. Capture Screen
4. Reserved
5. Assign as Default
6. View Default
Still1
Number: 53
Size: 1920×1080
Alpha: No
Frames: 1