Ross Synergy 100 MD, Руководство оператора

Страница: 304 / 402

17–28 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
As with sequences, you can set the type of motion for each Keyframe to indicate how that Keyframe
should move to the next Keyframe:
• Smooth motion — The image accelerates slowly at the start and decelerates slowly at
the end of the sequence. The motion between the Keyframes is a straight line.
• Spline motion — The image accelerates slowly at the start and decelerates slowly at the
end of the sequence. The motion between the Keyframes is a user modifiable
spline-curve that smoothly moves the image through each keyframe. Refer to the section
“
Modifying Spline Motion ” on page 17–10 for information on modifying spline motion
paths.
• Linear motion — The sequence moves from Keyframe to Keyframe at a constant
velocity. This produces a step-motion effect.
You may want to experiment with different types of motion when creating your wipe to see which
type will work best with the effect you are trying to produce.
You can also specify how quickly you want the image to move from Keyframe to Keyframe.
Note When you are building a Squeeze & Tease Wipe, you use the same
menus as when you are creating a sequence. Basically, you are creating
a sequence, then running this as a Squeeze & Tease Wipe. If you are
not familiar with these menus, refer to the section “
Working with
Sequences ” on page 17–20 for detailed descriptions.