Ross Synergy 100 MD, Руководство оператора

Страница: 44 / 402

2–4 • Control Panel Introduction Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
When any button is selected in the group, the Key Bus is assigned to the Downstream
Keyer. An
ON AIR
LED under the
DSK CUT
and
DSK DISS
buttons in the
Transition Control Group , indicates when the downstream key is contributing to the
program output.
Electronically, the Downstream key is downstream (visually in front) of both the
background buses and the Effects keys.
8. Transition Control Group
The Transition Control Group allows you to select the type of transition that you want
to perform between the current scene and the next scene. You can transition any
combination of the
Program/Preset
and
Key
buses using a cut, wipe, or dissolve.
The
DVE
button allows you to perform transitions using effects from an optional
Squeeze & Tease daughter board. Transitions can be performed manually with the
Fader or automatically with the
AUTO TRANS
button.
The
Fade to Black
button allows you to fade the switcher to black.
9. USB Port
The USB Port allows you to store and recall your entire switcher setup to and from a
USB Drive.
10. Positioner
The Positioner allows you to position wipe patterns on screen. By pressing the
WIPE
button in the Transition Control Group or the
PST PATT
button in the Effects Keyers
group, the Positioner is assigned. If the Squeeze & Tease MD or Squeeze & Tease
WARP MD option is installed, the Positioner can be used to manipulate the X, Y, and in
the case of the Squeeze & Tease WARP MD option, the Z position of a Squeeze &
Tease MD Key .
Note If you have the MultiDSK Option installed, the TRANS LIMIT and
PST BLACK buttons will be changed to DSK4 DISS and DSK5
DISS , respectively and the Transition Limit and PST Black features
will be unavailable.