Ross Synergy 100 MD, Руководство оператора

Страница: 236 / 402

12–26 • Squeeze & Tease MD Basic Operation Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
3. Run the sequence. The sequence will use the selected Frontside/Backside and Auto
Flip settings.
This completes the procedure for using the Frontside/Backside and Auto Flip features in a sequence.
Using Frontside/Backside Video with Squeeze & Tease Wipes
When running a Squeeze & Tease Wipe, any Frontside/Backside and Auto Flip information contained
in the wipe itself will not be recognized. In order to run Frontside/Backside and Auto Flip effects with
a wipe, the effects will have to be applied to the wipe when it is loaded up.
Use the following procedure to use Frontside/Backside and Auto Flip features in a Squeeze & Tease
Wipe:
1. Load the Squeeze & Tease Wipe. Refer to section “ Loading a Squeeze & Tease Wipe ”
on page 17–31 for instructions on loading a Squeeze & Tease Wipe.
2. In the Channel Management Menu , activate the Backside video for the desired
channels to On .
• Press 5. Front and select a front crosspoint.
• Press 6. Back and select a back crosspoint.
• Press 7. Auto Flip to select an Auto Flip option.
3. Run the Squeeze & Tease Wipe.
The Squeeze & Tease Wipe will use the selected Frontside/Backside and Auto Flip
settings.
This completes the procedure for using the Frontside/Backside and Auto Flip features in a Squeeze
& Tease Wipe.
Note
The Frontside/Backside Video feature cannot be used with background
Squeeze & Tease Wipes.
Operating
Tip
You can make this process easy to repeat in the future by saving these
settings in a memory register and then recalling it as needed.