Ross Synergy 100 MD, Руководство оператора

Страница: 308 / 402

17–32 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Running a Squeeze & Tease Wipe
When running a Squeeze & Tease Wipe transition, the system dynamically allocates channels to
produce the appropriate effect. If there are not enough channels available to complete the Squeeze &
Tease Wipe, a dissolve is performed. Once the Squeeze & Tease Wipe is complete, the internally
allocated channels are freed for you to use.
Running a Squeeze & Tease Wipe
Use the following procedure to run a Squeeze & Tease Wipe:
1. Ensure the Squeeze & Tease Wipe is loaded. Refer to the section “ Loading a Squeeze &
Tease Wipe ” on page 9–29 for more information.
2. Press the
WIPE
and
DVE
buttons at the same time.
3. Run the wipe using one of the following methods:
• Press the
AUTO TRANS
button to run the Squeeze & Tease Wipe automatically.
• Use the
Fader
to run it manually. Manually, the Squeeze & Tease Wipe always
ends at the end of the Fader movement (up or down).
Running the Squeeze & Tease Wipe
This competes the procedure for running a sequence. In the last Keyframe, the image will be off
screen. At the end of the Squeeze & Tease Wipe, the Key cuts off-air.
Notes on Running a Squeeze & Tease Wipe
Note the following points when running a Squeeze & Tease Wipe:
• You can change the rate at which the Squeeze & Tease Wipe runs. Refer to the section
“
Running a Sequence ” on page 17–23 for more information.
• You can Squeeze & Tease Wipe a Key whether the
FLY KEY
is on or not so you do not
have to remember to press
FLY KEY
before performing a wipe.
ON AIR ON AIR ON AIR ON AIR
ON AIR
BKGD KEY1 KEY2
DISS
CUT
WIPE
AUTO
TRANS
TRANS
LIMIT
DSK
CUT
PST
BLACK
DSK
DISS
FADE
TO
BLACK
DVE
T R A N S I T I O N C O N T R O L
Press
WIPE
and
DVE
to prepare to run the wipe
Use this button to run
the wipe automatically
Use the fader to run
the wipe manually